Lenze EtherCAT Controller-based Automation - Manual (Page 74)

7 Commissioning of the system
7.3 Detailed description of the commissioning steps
74
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. Click the Scan network button.
4. Select the suitable controller for the IP address entered under 2. and activate it by
means of the Set active path button (or by double-click).
5. Now you can carry out the following actions using the »PLC Designer«:
 Determining the physical EtherCAT configuration (fieldbus scan) ( 75)
 Logging in on the controller with the »PLC Designer« ( 103)