11 creating a task, Creating a task ( 82), 7commissioning of the system – Lenze EtherCAT Controller-based Automation User Manual
Page 82
7
Commissioning of the system
7.3
Detailed description of the commissioning steps
82
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.3.11
Creating a task
How to create a task in »PLC Designer«
1. Open the context menu of the Task configuration and execute the command Add object in
order to create a new task.
Assign a reasonable task name, e.g. "MotionTask".
2. Enter a reasonable cycle time in milliseconds for the created task in the Interval input field.
Note!
• Select a cycle time, according to the technical data, from 1 ... 10 ms.
• If "distributed clocks" (DC) are used, the task cycle time to be set must comply with the
set DC cycle time.