7 commissioning of the system, 1 sample projects (application samples), Commissioning of the system – Lenze EtherCAT Controller-based Automation User Manual
Page 39: Sample projects (application samples), Commissioning of the system ( 39), 7commissioning of the system
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
39
7
Commissioning of the system
7.1
Sample projects (Application Samples)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7
Commissioning of the system
This chapter provides information on how to commission the Lenze automation system with
EtherCAT.
Depending on the field devices used, the following
are required:
• »EASY Starter«
• »Engineer«
• »PLC Designer«
7.1
Sample projects (Application Samples)
There already exist sample projects (device application + PLC program) for commissioning of Lenze
inverters.
The Lenze sample projects can be found in the MS Windows start menu under:
Start All programs Lenze AppSamples ...
The Lenze sample projects can also be opened in the »PLC Designer« via the menu command File
New project..., or using <Ctrl>+<N>.
Detailed information on the sample projects can be found in the following
documentation:
• SW_ApplicationSample_i700_(PLC Designer V3)_Vx-y_DE/EN.pdf
• SW_ApplicationSamples_(Controller-based)_Vx-y_DE/EN.pdf