Lenze EtherCAT Controller-based Automation - Manual (Page 168)

12 Diagnostics
12.1 Diagnostics with the »PLC Designer«
168
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
In general, all fields in the visualisation are initially white. If a status variable or a state is
set or active (TRUE), the corresponding field is shown in green or red:
• Red fields represents an "error".
• Green fields display "information".