Lenze EtherCAT Controller-based Automation - Manual (Page 68)

7 Commissioning of the system
7.3 Detailed description of the commissioning steps
68
Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Adapt parameter values in order to optimise the control system.
• In the signal flow diagrams, you can adapt some parameter values directly in the
corresponding input fields.
• In addition, you can adapt parameter values for particular functions by means of
function buttons, depending on the operating mode being used (see table below).