Lenze EtherCAT Controller-based Automation - Manual (Page 29)

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
29
4 The Lenze automation system with EtherCAT
4.3 Lenze Engineering tools
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.3 Lenze Engineering tools
The Lenze Engineering tools enable the configuration and operation of controller-based Lenze
automation systems according to individual requirements.
Use the corresponding Engineering tool applicable to the field device.
»EASY Navigator«: Starting the suitable Engineering tool
The Lenze Engineering software consists of the Engineering tools optimised for the respective
Engineering stage.
The »EASY Navigator« represents the Lenze Engineering tools installed on the Engineering PC. Start
the desired Engineering tool via the corresponding button:
The »EASY Navigator« ...
• simplifies orientation for selecting the suitable Engineering tool;
• allows for the simple start of the required Engineering tool (depending on the application):
Further Engineering tools that are not called via the »EASY Navigator« are:
• »WebConfig« (web-based parameterisation, configuration, and online diagnostics)
• »Backup & Restore« (data backup/recovery, software update).
What would you like to do? Button Engineering tool
Programming
• Program the controller
• Parameterise/commission the Servo-Inverter i700
• Parameterise the I/O system 1000
»PLC Designer«
Parameterising/configuring the inverter
• Parameterising and configuring the automation/drive
system
• Parameterising Inverter Drives 8400/Servo Drives 9400
»Engineer«
Visualising
• Visualising the applications of the automation system
• Creating the visualisation/user interfaces
»VisiWinNET«
Online diagnostics
• Easy online diagnostics of the controllers (from »EASY
Starter« V1.2) and other Lenze devices
»EASY Starter«
(reading parameters)
Online parameterisation
• Online parameterisation/commissioning of Lenze
devices
• Direct online parameterisation when the online
connection to the Lenze devices is active.
»EASY Starter«
(reading/writing
parameters)