Lenze EtherCAT Controller-based Automation - Manual (Page 99)

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17
99
7 Commissioning of the system
7.3 Detailed description of the commissioning steps
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6. Open the context menu by right-clicking the PDO Content (16#1605) and execute the
Insert menu command.
7. In the dialog box that appears, you can select a single index (parameter) or a group of
indices and insert them into the PDO Content (16#1605) via the OK button.
The inserted indices (parameters) are also displayed in the free PDO mapping (16#1605)
under the process data tab.