Lenze EVF9383 - Manual (Page 115)

Configuration
2−107
l
EDSVF9383V−EXT EN 2.0
Function
t
t
FLIPx−D
FLIPx−CLK
t
FLIPx−OUT
Fig. 2−87 Sequence of a flipflop
l A LOW−HIGH signal at the input FLIPx−CLK changes the signal at the input FLIPx−D to the
output FLIPx−OUT and saves it until
– another LOW−HIGH edge is applied at the input FLIPx−CLK or
– the input FLIPx−CLR is set HIGH.
l The input FLIPx−CLR always has priority.
– If the input FLIPx−CLR = HIGH, the output FLIPx−OUT = LOW and held as long as
FLIPx−CLR = HIGH.