Lenze EVF9383 - Manual (Page 172)

Application examples
Important notes
3−2
l
EDSVF9383V−EXT EN 2.0
3.1 Important notes
For frequent applications, the controller−internal signal processing is stored in basic configurations.
l Under C0005, the basic configurations can be selected, activated, and, with a few settings,
adapted to your application (Short Setup). (
¶ 2−4)
l The setting of the motor data and the adaptation of the motor control are usually independent
of the configuration and described in the chapter "Commissioning".
)
Note!
In the "Short setup" menus of the "Global Drive Control" (GDC) operating/parameter
setting software and the XT keypad, you can find the most important codes for the
basic configurations.