Lenze EVF9383 - Manual (Page 170)

Configuration
2−162
l
EDSVF9383V−EXT EN 2.0
2.4.58.3 Evaluate positive or negative edge
l C0710 = 2 (TRANS1)
l C0715 = 2 (TRANS2)
t
t
TRANS1−IN
TRANS1−OUT
C0711 C0711
Fig. 2−143 Evaluation of positive and negative edges (TRANS1)
Function procedure
1. With a HIGH−LOW edge or a LOW−HIGH edge at TRANSx−IN, TRANSx−OUT = HIGH.
2. After the time set under C0711 (TRANS1) or C0716 (TRANS2) has elapsed, TRANSx−OUT
switches to LOW again.
– Every new trigger event (LOW−HIGH edge or HIGH−LOW edge at TRANSx−IN) switches
TRANSx−OUT = HIGH and restarts the elapsing time.