Lenze EVF9383 - Manual (Page 66)

Configuration
2−58
l
EDSVF9383V−EXT EN 2.0
Function
l Gain
– The value at AOUTx−IN is multiplied with the value at AOUTx−GAIN.
– Example for the multiplication of analog signals:
100 %
@ 100 % + 100 %
– The result of the multiplication is limited to ±200%.
l Offset
– The limited value (after the gain) is added to the value at AOUTx−OFFSET.
– The result of the addition is limited to ±200%.
l The result of the calculation is mapped in such a way that 100% = 10 V. This signal is output
at terminal X6/62 or X6/63.
Example:
AOUT1−IN = 50 %
AOUT1−GAIN = 100 %
AOUT1−OFFSET = 10 %
Signal at terminal X6/62:
((50 % @ 100 %) + 50 %) ) 10 % + 60 %) + 6 V
AOUT−GAIN
AOUT−IN
OUT
ООООО
ООООО
AOUT−OFFSET
Fig. 2−38 Offset and gain of the analog output