Lenze EVF9383 - Manual (Page 63)

Configuration
2−55
l
EDSVF9383V−EXT EN 2.0
Function
ANDx−IN1 ANDx−IN2 ANDx−IN3 ANDx−OUT
0 0 0 0
1 0 0 0
0 1 0 0
1 1 0 0
0 0 1 0
1 0 1 0
0 1 1 0
1 1 1 1
0 = LOW
1 = HIGH
In a contactor control, the function corresponds to a series connection of normally−open contacts.
ANDx−IN1
ANDx−IN2
ANDx−IN3
ANDx−OUT
Fig. 2−33 AND function as a series connection of normally−open contacts
Tip!
If only two inputs are required, use the inputs ANDx−IN1 and ANDx−IN2. Assign the input ANDx−IN3
to the signal source FIXED1.