Lenze EVF9383 - Manual (Page 169)

Configuration
2−161
l
EDSVF9383V−EXT EN 2.0
2.4.58.1 Evaluate positive edge
l C0710 = 0 (TRANS1)
l C0715 = 0 (TRANS2)
t
t
TRANS1−IN
TRANS1−OUT
C0711 C0711
Fig. 2−141 Evaluation of positive edges (TRANS1)
Function procedure
1. With a LOW−HIGH edge at TRANSx−IN, TRANSx−OUT = HIGH.
2. After the time set under C0711 (TRANS1) or C0716 (TRANS2) has elapsed, TRANSx−OUT
switches to LOW again.
– Every new trigger event (LOW−HIGH edge at TRANSx−IN) switches TRANSx−OUT = HIGH
and restarts the elapsing time.
2.4.58.2 Evalute negative edge
l C0710 = 1 (TRANS1)
l C0715 = 1 (TRANS2)
t
t
TRANS1−IN
TRANS1−OUT
C0711 C0711
Fig. 2−142 Evaluation of negative edges (TRANS1)
Function procedure
1. With a HIGH−LOW edge at TRANSx−IN, TRANSx−OUT = HIGH.
2. After the time set under C0711 (TRANS1) or C0716 (TRANS2) has elapsed, TRANSx−OUT
switches to LOW again.
– Every new trigger event (LOW−HIGH edge at TRANSx−IN) switches TRANSx−OUT = HIGH
and restarts the elapsing time.