Rockwell Automation 23P PowerFlex Digital DC Drive User Manual
Page 127
Rockwell Automation Publication 20P-UM001K-EN-P - July 2014
127
Programming and Parameters
Chapter 3
MONIT
O
R
Dri
ve Da
ta
465
[Drive Size]
Armature current rating (as indicated by the configuration of DIP switch S15
on the control board). This value is used to determine the Drive Overload fault
(F64).
Note: S15 is set to the appropriate value at the factory. However, if the control
board was supplied separate from the drive and installed as a replacement
part, S15 must be manually set to the appropriate drive size. See DIP Switch
and Jumper Settings on page
.
Default:
Min/Max:
Units:
Read Only
0 / Based on drive current rating
A
16-bit
Int
466
[AC Line Voltage]
AC input voltage.
Default:
Min/Max:
Units:
Read Only
0 / 960
Vac
16-bit
Int
588
[AC Line Freq]
AC input frequency.
Default:
Min/Max:
Units:
Read Only
0.00 / 70.00
Hz
Real
1052
[Output Power]
Output power.
Note: This parameter can be assigned to an analog output.
Default:
Min/Max:
Units:
Read Only
0.00 / 9999.99
kW
Real
Fil
e
Gr
oup
No
.
Parameter Name & Description
See
page 114
for symbol descriptions
Values
Da
ta
T
yp
e
Rela
ted