Rockwell Automation 23P PowerFlex Digital DC Drive - Manual (Page 27)

Rockwell Automation Publication 20P-UM001K-EN-P - July 2014 27
Installation and Wiring Chapter 1
Remove the Drive Covers Some protective covers must be removed to provide access to the power and I/O
terminals on the drive. Remove the upper cover only to install an optional
communication adapter or service the drive. See Installing a Communication
Adapter on page
367 for information.
Frame A Drives
You must remove both the lower protective cover and the power terminal cover
on frame A drives to access the power terminals.
Remove the Power Terminal Cover
• Remove the two screws as shown here and slide the cover down and off the
chassis.