Rockwell Automation 23P PowerFlex Digital DC Drive - Manual (Page 26)

26 Rockwell Automation Publication 20P-UM001K-EN-P - July 2014
Chapter 1 Installation and Wiring
Figure 7 - Lift Frame C Drives
Figure 8 - Lift Frame D Drives
4. Lift the drive into place onto the bolts that are installed in the panel.
5. Install the remaining bolts into the panel. Tighten M8 bolts to a minimum
torque of 15 N
• m (132.7 lb • in) and M10 bolts to a minimum torque of 25
N • m (221.2 lb • in).
Lifting flanges
Must be less
than 45° angle
Must be less
than 45° angle