Rockwell Automation 23P PowerFlex Digital DC Drive - Manual (Page 14)

14 Rockwell Automation Publication 20P-UM001K-EN-P - July 2014
Preface
General Precautions
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts and
assemblies. Static control precautions are required when you install, test, service,
or repair this assembly. If ESD control procedures are not followed, component
damage can result. If you are not familiar with static control procedures, see
publication 8000-4.5.2, “Guarding Against Electrostatic Damage” or any other
applicable ESD protection handbook.
ATTENTION: An incorrectly applied or installed drive can result in component
damage or a reduction in product life. Installation or application errors, such as,
an undersized motor, incorrect or inadequate AC supply, or excessive surrounding
air temperatures can result in malfunction of the system.
ATTENTION: Allow only qualified personnel, familiar with DC drives and
associated machinery, to plan or implement the installation, start-up and
subsequent maintenance of the system. Failure to comply can result in personal
injury and equipment damage.
ATTENTION: An incorrectly applied or installed bypass system can result in
component damage or reduction in product life. The most common causes are:
• An AC line connection to the drive output or control terminals.
• Improper bypass or output circuits that are not Allen-Bradley approved.
• Output circuits that do not connect directly to the motor.
Contact Allen-Bradley for assistance with your application or installation.