Removing/installing the him – Rockwell Automation 23P PowerFlex Digital DC Drive User Manual
Page 271
Advertising
![background image](/manuals/576962/271/background.png)
Rockwell Automation Publication 20P-UM001K-EN-P - July 2014
271
HIM Overview
Appendix B
Removing/Installing the HIM
The HIM can be removed or installed while the drive is powered.
IMPORTANT
HIM removal is only permissible in Auto mode. If the HIM is removed while in
Manual mode or the HIM is the only remaining control device, a fault will occur.
Step
Key(s)
Example Displays
To remove the HIM…
1. Press ALT and then Enter (Remove). The Remove
HIM confirmation screen appears.
2. Press Enter to confirm that you want to remove
the HIM.
3. Remove the HIM from the drive.
To install the HIM…
• Insert into drive or connect cable.
ALT
+
Remove Op Intrfc:
Press Enter to
Disconnect Op Intrfc?
(Port 1 Control)
Advertising
This manual is related to the following products: