Rockwell Automation MD65 User Manual Version 2.0 - Manual (Page 101)

Parameter Descriptions 9-47
Displays the present DC bus voltage level.
Displays the present operating status of the drive.
Displays a code that represents a drive fault. The codes will appear
in these parameters in the order they occur (that is, Fault 1 Code in
d007 will contain the more recent fault). Repetitive faults will be
recorded only once. Refer to chapter 10 for the fault code
descriptions.
d005 DC Bus Voltage
Range: Based on Drive Rating
Default: Read Only
See also: N/A
d006 Drive Status
Range: 0 = Condition False
1 = Condition True
See figure 9.15
Default: Read Only
See also: A095
Figure 9.15 – Drive Status (d006) Bit Definitions
d007
d008
d009 Fault 1 Code
Fault 2 Code
Fault 3 Code
Range: F2 to F122
Default: Read Only
See also: N/A
Running Bit 0
Forward Bit 1
Accelerating Bit 2
Decelerating Bit 3