Rockwell Automation MD65 User Manual Version 2.0 - Manual (Page 13)

About the MD65 Drive 2-1
C
HAPTER
2
About the MD65 Drive
This chapter provides general information about the MD65 AC drive,
including how to identify the drive.
2.1 Identifying the Drive by Model
Number
Each drive can be identified by its model number, as shown in
figure 2.1. The model number is on the shipping label and the drive
nameplate. The model number includes the drive and any options.
Drive model numbers are provided in table 2.1.
Figure 2.1 – Identifying the Drive by Model Number
1 = M D 60 Drive
2 = M D 65 Drive
6M D V N - 2P 3 1 0 2
6M D = P roduct Fam ily
@ 115V / 230 VAC
2P3 = 2.3 A , 0.5 H P
5P0 = 5.0 A , 1 H P
6P0 = 6.0 A , 1.5 H P
8P0 = 8 A , 2 H P
012 = 12 A, 3 H P
017 = 17.5 A, 5 H P
024 = 24 A, 7.5 H P
033 = 33 A, 10 H P
@ 460 VAC
1P4 = 1.4 A , 0.5 H P
2P3 = 2.3 A , 1 H P
4P0 = 4 A , 2 H P
6P0 = 6 A , 3 H P
010 = 10.5 A, 5 HP
012 = 12 A, 7.5 H P
017 = 17 A, 10 H P
024 = 24 A, 15HP
A = 1-Phase, 240 VA C
V = 1-Phase, 120 VA C
B = 3-Phase, 240 VA C
D = 3-Phase, 460 VAC
E = 3-Phase, 600 VA C
N = IP20 (O pen)
0 = N o Filter
1 = Internal Filter
R eserved
@ 600 V AC
1P7 = 1.7 A, 1 HP
3P0 = 3.0 A, 2 HP
4P2 = 4.2 A, 3 HP
6P6 = 6.6 A, 5 HP
9P9 = 9.9 A, 7.5 HP
012 = 12.0 A , 10 HP
019 = 19.0 A , 15 HP