Rockwell Automation MD65 User Manual Version 2.0 - Manual (Page 131)

Parameters Cross-Referenced by Name C-3
Flux Current Ref A129 Advanced Based on Drive
Rating 9-38
Flying Start En A096 Advanced 0 = Disabled 9-28
Internal Freq A069 Advanced 0.0 Hz 9-19
IR Voltage Drop A128 Advanced Based on Drive
Rating 9-38
Jog Accel/Decel A079 Advanced 10.0 sec 9-21
Jog Frequency A078 Advanced 10.0 Hz 9-20
Language A108 Advanced 1 = English 9-31
Maximum Freq P035 Basic 60 Hz 9-2
Maximum Voltage A088 Advanced Drive Rated
Volts 9-25
Minimum Freq P034 Basic 0.0 Hz 9-2
MOP Reset Sel A162 Advanced 1 = Save MOP
Ref 9-45
Motor NP FLA A126 Advanced Drive Rated
Amps 9-37
Motor NP Hertz P032 Basic 60 Hz 9-2
Motor NP Volts P031 Basic Varies 9-2
Motor OL Current P033 Basic Varies 9-2
Motor OL Select A090 Advanced 0 = No Derate 9-25
Opto Out Logic A064 Advanced 0 9-16
Opto Out1 Level A059 Advanced 0.0 9-16
Opto Out1 Sel A058 Advanced 0 = Ready/Fault 9-14
Opto Out2 Level A062 Advanced 0.0 9-16
Opto Out2 Sel A061 Advanced 2 = Motor
Running 9-14
Output Current d003 Display Read Only 9-46
Output Freq d001 Display Read Only 9-46
Output Power d022 Display Read Only 9-51
Output Power Fctr d023 Display Read Only 9-51
Output Torque Current d029 Display Read Only 9-52
Output Voltage d004 Display Read Only 9-46
PID Deadband A138 Advanced 0.0% 9-40
PID Diff Rate A136 Advanced 0.0 (1/sec) 9-40
PID Feedback Sel A133 Advanced 0 = 1-10V Input 9-39
PID Integ Time A135 Advanced 0.0 sec 9-40
Parameter Name No.
Parameter
Group
Default
Value
Page
No.