Rockwell Automation MD65 User Manual Version 2.0 - Manual (Page 22)

3-6 MD65 AC Drive User Manual
3.2 Mounting the Drive
Mount the drive upright on a flat, vertical, and level surface.
3.2.1 Protecting the Drive from Debris
A plastic top panel is included with the drive. Install the panel to
prevent debris from falling through the vent of the drive housing
during installation. Remove the panel for IP20/Open Type
applications.
Table 3.2 – Mounting Specifications
Frame Screw Size Screw Torque -OR- DIN Rail
B M4 (#8-32) 1.56-1.96 N-m (14-17 in-lb) 35 mm
C M5 (#10-24) 2.45-2.94 N-m (22-26 in-lb) –