Hypertherm Phoenix 8.0 - Manual (Page 186)

Library Shapes
179
Base Width
Enter the width of the base of the part.
Height
Enter the height of the part.
Corner Radius
Enter the length of the radius of the curve in the convex corners.
Convex Corners
Enter the number of convex corners on the part.
Lead In Radius
Enter the radius of the lead-in arc.
Lead Out Radius
Enter the radius of the lead-out arc.
Part Type
Indicate whether you want to cut the part as a separate piece or a hole in a larger part.
Chain cut options are available for simple shapes that have external cut paths.
Lead Type
Depending on the shape you select, the style of the lead in/ lead out can be selected as
radius, lock or straight line. The lock style lead-in creates greater stability for the part
and is only available if the part type is set to piece. Lead-in selection is only available if
the part type is set to piece or hole.
Note: Some shapes offer drop down fields to increase options with additional parameters.