Hypertherm Phoenix 8.0 - Manual (Page 424)

Sensor THC
417
Marker Setups
The test lifter soft key is available to test the IHS function.
Test Lifter
Press the Test Lifter soft key to command the torch lifter to descend to the plate, sense
the plate, and retract to the pierce height.
Purge Time
Specifies the time delay from torch ignition until motion is enabled.
Start Time
Specifies the time delay from when torch completes lowering until motion is initiated at
Creep Speed. Used to allow the Marker to completely transfer to the material before
moving.