Hypertherm Phoenix 8.0 - Manual (Page 98)

Setups
91
Plasma Torch Tip
Allows the selected plasma torch tip (1- 8) consumable life to be graphically displayed
while cutting. This is especially useful in helping to determine when the torch tip should
be replaced and keeping track of torch tip data for statistical process control (SPC).
Plasma Electrode
Allows the selected plasma electrode (1- 8) consumable life to be graphically displayed
while cutting. This is especially useful in helping to determine when the electrode should
be replaced and keeping track of electrode data for statistical process control (SPC).
Jog Keys
Selecting the jog keys option allows a directional keypad to be added to the watch
window for manual motion directly from the touch screen. The operator can press the
hand ICON in the middle of the navigation pad to enable manual mode. Select the
desired move speed and press the corresponding arrow for manual motion in the desired
direction.
Process Data
The Process Data option allows the user to view up to four selected items for a selected
cut or marking process. Process timers and status items for Oxy Fuel, Plasma, Marker,
Water jet and Laser may be selected. Note: The process data will only be displayed
during the current cut process. Example: Plasma 1 process parameters will only be
displayed in the Watch window at the main cut screen while cutting in Plasma 1 Mode.
Laser Nozzle
Laser Nozzle consumable life to be graphically displayed while cutting. This is
especially useful in helping to determine when the nozzle should be replaced and keeping
track of nozzle data for statistical process control (SPC).
HPR Power Supply
Allows the user to view status for inputs, outputs and gas pressures for the HPR autogas
console. Up to four power supplies may be monitored. This is generally used for
service diagnostics only.
Multiple Watch Windows
Up to ten different Watch windows may be configured on the control for quick selection
and viewing of the Watch icons.
To configure different Watch windows for viewing, first access the Watch setup screen.
Press the number ICON to enter a number or the Left/Right arrows to move up and down
through the selections. The different Watch windows can be selected and viewed during
operation using the same selection process.