Hypertherm Phoenix 8.0 - Manual (Page 290)

283
Cut Operations
CutPro Wizard
The CutPro wizard automates the sequence of choices and selections that you must make
before you begin cutting parts. If you have parts, nests, and cutting processes stored on
your system, you can use the CutPro wizard to simplify cutting operations.
The CutPro wizard also helps you to align parts and handle plate skew with the Align
wizard. For more information on the Align wizard, see the Part Options chapter.
The CutPro wizard opens automatically from the Main screen or you can press the
CutPro Wizard soft key on the Main screen. As you work with the CutPro wizard, it
keeps track of your progress and displays it at the bottom of the wizard window in the
progress bar.
Cutting in Manual Mode
After you verify that the cut mode, cut speed and Kerf values are set correctly, press the
Start key on the Main or Manual window to cut a part. The following window is
displayed: