Hypertherm Phoenix 8.0 - Manual (Page 56)

Setups
49
To select the analog signals that are used for oxygen valve pressure control:
1.
On the Machine Setups password screen, press the I/O button.
2.
Select each control and assign an analog output for it.
The controls are listed in groups. All items in each group should be selected and
matched with an analog output:
•
Cut Oxygen
•
Preheat Oxygen
•
Preheat Fuel
•
Cut Oxygen TBT 2
•
Preheat Oxygen TBT 2
•
Preheat Fuel TBT 2
•
Cut Oxygen TBT 3
•
Preheat Oxygen TBT 3
•
Preheat Fuel TBT 3
•
Preheat Oxygen TBPT
•
Preheat Fuel TBPT