Hypertherm Phoenix 8.0 - Manual (Page 338)

Password Setups
331
Auto Torch Spacing
Select Yes to enable the automatic torch spacing feature. This feature uses embedded
part program codes and dedicated outputs to control individual torch stations to set
spacing and clamping of direct and mirrored cutting. Refer to the Auto Torch Spacing
information for additional information.
Tilt Rotator Installed
Enables use of the Tilt Rotator feature. Tilt Rotator is a unique rotational cutting tool that
combines a rotational axis with a tilt (bevel) axis that performs for compound cutting.
Note: The Tilt Rotator feature executes the tilt-angle motion over the length of the line
segment.
Dual-Tilt Rotator Installed
This parameter enables use of a second tilt rotator feature. A second transverse axis is
enabled and allows individual, parallel, and mirror cutting.
Auto Home at Power Up
Determines if the contour bevel head (CBH) and tilt or rotate axes automatically go into
the homing routine when the CNC powers up.
Follower Initially
Determines whether the CBH and rotate features are always enabled after power up or are
enabled through the part program.