Hypertherm Phoenix 8.0 - Manual (Page 395)

Password Setups
388
Save Part for Rush Job
Enables or disables the Resume Part prompt for Rush Job Interrupt.
Automatic Align Wizard
Enables or disables the automatic availability of the alignment wizard on the Align
screen.
Automatic Cut Wizard
Enables or disables the automatic availability of the Cut Pro wizard on the Main screen.
If availability of the wizard is enabled, it appears 10 seconds after the Main screen is
opened.
Start Cut from Cut Wizard
Allows or prevents cutting to start directly from the Cut Pro Wizard. If this is disabled,
the operator must use the Start button on the console to begin the cut.
Latched Manual Keys
Enables or disables the Latched Manual Key feature which allows the manual motion
keys to remain on with a single key press.
Auto Drop Down
When this option is enabled, all options are displayed in a drop-down list.
Zero Positions
Determines whether the CNC operator has the ability to zero positions. When disabled,
the zero positions soft key is grayed out and is unavailable to the operator.
Auto Size App.
Changes the size of the application software to full screen display (when it is enabled) or
the standard size of 640x480.
Language
Allows the user to select the language that is displayed on the CNC from the available
languages stored on the control. Languages can be added to the CNC by performing the
standard software update with a language-specific update file. Some languages also
require the installation of a font viewer to properly display characters. To change to a
different language, select the desired language and press the OK soft key. You must
restart the CNC for the new language to be displayed.