Hypertherm Phoenix 8.0 - Manual (Page 570)

Voyager III
563
Setups
Drive Type
The manufacturer of the SERCOS style drive being used would be selected. This allows
proper operation and tuning parameters to be available. SMCC is the default setting for
Voyager III.
Update Rate
The update rate for the ring may be selected for motion and I/O. One millisecond is the
default setting for Voyager III.
Baud Rate
Communication rate for the ring may be selected. 16 Mbaud is the default setting for
Voyager III.
Light Level
The user has the ability to adjust the intensity of the light pulses used on the fiber optic
ring. This feature is used to compensate for diminished signal due to issues such as ring
distance. Low is the default setting for Voyager III