Hypertherm Phoenix 8.0 - Manual (Page 340)

Password Setups
333
SERCOS
The SERCOS interface requires configuration to establish communications for motion
and I/O.
The following drives are supported and are preferred:
Indramat/Bosch
• IndraDrive Mi
• IndraDrive C basic drive
• IndraDrive C basic drive with MA1 option
• IndraDrive C advanced drive
• IndraDrive C advanced drive with MA1 option
Kollmorgen
ServoStar 300
The following drives are also supported:
Indramat/Bosch
IndraDrive M Double Drive (I/O on drives is not supported)
EcoDrive 03
EcoDrive Cs
Kollmorgen/Danaher
ServoStar 600
SSCD
Yaskawa
Sigma II with TRIO SERCOS adapter
PacSci
PC840 Series
The SERCOS I/O modules that are supported include:
• 1 Reco Inline SERCOS node
• 1 Reco 02.2 SERCOS node
• 1 Beckhoff SERCOS node
• 1 Hypertherm Automation I/O SERCOS node
Note: A single Hypertherm Automation I/O node can be configured with either 1 Reco
or 1 Beckhoff node. No more than one Reco or Beckhoff I/O node can be enabled.