Hypertherm Phoenix 8.0 - Manual (Page 397)

Password Setups
390
Note: After installation of the CNC on the cutting table or if any setup parameters
are changed, it is important to save the current setup file to both the hard drive and floppy
disk for future reference.
Load Setups
Press Load Setups to load the selected control setting from the floppy drive or hard drive
on to the control. A window displays where you can select the drive and enter the file
name.
Update Software
Press the Update Software button to update the CNC operating software from a floppy
disk.
Update Help
Press the Update Help button to update the CNC help files from a floppy disk.
System Tools
Press the System Tools button to access core Windows features for system performance.
Features include Update Registry, Scan Hard Disk, Defrag Hard Disk and Format Disk.
System Tools also accesses features for virus scanning and adding special fonts for some
languages.
Restore Last Version
Restores the CNC to the previous version of system software.
Make Link Disk
The CNC is shipped with proprietary communication link software for communication
with a host computer. Press this soft key to transfer the link software to a floppy disk so
it can be loaded onto a host computer. A text file is included with the software to instruct
the user on setup and use of the link.