Hypertherm Phoenix 8.0 - Manual (Page 428)

Sensor THC
421
Sensor THC Setups
Analog Input
The Sensor THC requires that additional inputs, outputs and analog voltage be
transmitted to the CNC to monitor the process. These signals are transmitted to the CNC
through an analog input card that is installed in the CNC. In addition to THC operations,
this analog input card can also be used for operation of an optional joystick and external
speed pots.
Note: The appearance of the view screens varies depending upon the analog input card
that has been installed.
Inputs / Outputs
Single-ended inputs and outputs located on the analog input card are displayed.
Analog Inputs
The analog input values shown in the upper right of the screen are the actual voltages
coming into the analog card. Analog inputs that are assigned to the THC axis and the
analog input for the THC are visible here.