Hypertherm Phoenix 8.0 - Manual (Page 391)

Password Setups
384
In the previous example, you can see that the Cutting and Marking with the HD4070
Integrated Torch 1 is limited to Plasma 1 and Maker 1 on Station 1. Additionally, the
cutting and marking with HD4070
Integrated Torch 2 is limited to Plasma 2 and Maker 2
on Station 2. These stations can be configured for Cut or Mark or both. A second multi-
dropped HD4070 can also be assigned on stations 3 and 4.
Support for FineLine 100 / 200
You can configure serial communications to the Inner Logic FineLine 100 and FineLine
200 for use with selected THCs.