Hypertherm Phoenix 8.0 - Manual (Page 210)

Library Shapes
203
Tab to Left Side
Enter the distance between the left side of the part and the left side of the tab.
Tab Width
Enter the width of the tab.
Tab to Right Side
Enter the distance between the right side of the part and the right side of the tab.
Tab Height
Enter the height of the tab.
Overall Heigth
Enter the height of the part from the base to the top of the tab.
Convex Diameter
Enter the diameter of the convex curve of the tab.
Lead-In/Lead-Out Length
Enter the appropriate value to ensure proper piercing (lead-in) and gas bleed-off (lead-
out) to obtain optimum cut quality.
The location for the lead-in and lead-out is fixed, but can be changed by using the
ShapeWizard and then saving the new shape to disk.
Part Type
Indicate whether you want to cut the part as a separate piece or a hole in a larger part.
Chain cut options are available for simple shapes that have external cut paths.