Set up your phone, Charge the battery – Kyocera DuraForce Pro User Manual
Page 14
Get Started
3
●
Volume key allows you to adjust the ringtone or media volume when you are not on a
call, or adjust the voice volume during a call.
●
Power key lets you turn the phone on or off or turn the screen on or off, restart the
phone, switch your phone to Airplane mode, or capture screenshots. The key also works
as the fingerprint sensor.
●
SIM/microSD slots (internal) allow you to insert a SIM card and a microSD card.
Note: microSD cards are sold separately.
●
Camera key lets you activate the front camera,
the back camera or the wide view
camera.
●
Back camera lets you take pictures and videos.
●
Flash helps illuminate subjects in low-light environments when taking a picture or
recording a video. It can also work as an LED flashlight. See
●
Wide view camera lets you take pictures and videos in wide angle.
●
Charging contacts allow you to connect to a multi-bay battery charger that can charge
multiple phones simultaneously.
Set Up Your Phone
You need to charge the battery to begin setting up your phone.
Charge the Battery
Fully charge the battery before powering on the phone.
Important:
Unplug the AC adapter from the electrical outlet when not in use to reduce the
environmental impact of charging.
1. Open the cover to the Charger/USB port on the bottom of the phone.
2.
Plug the smaller end of the USB cable into the phone’s Charger/USB port.
3. Plug the other end of the USB cable into the AC adapter, and then plug the adapter into
an electrical outlet. Be sure to use the AC adapter that came with your phone.