Cleaning and drying procedures, Precautions – Kyocera DuraForce Pro User Manual

Page 164

Advertising
background image

Cleaning and Drying Procedures

153

Cleaning and Drying Procedures

Your phone may be cleaned using a mild dish detergent. It may also be cleaned using alcohol
or sanitizer wipes. Please see the proper procedures below.

Precautions

Remove all accessories, such as screen protector, phone case and cover, and strap. For
details, refer to the instructions that came with your accessory.

Before cleaning, be sure the headset jack cover, card slot cover, and charger/USB port
cover are closed firmly to maintain the waterproof capability.

Kyocera has tested cleaning products and determined they will not damage the surfaces
of the phone when used properly. A table containing these products can be found at the
end of this section. See

Kyocera Tested Products

.

Never apply or spray alcohol directly on the phone as it can lead to damage of the
coating and could affect its waterproof capability.

Never pour liquid detergent directly onto the phone as this may affect the sound quality.
If your phone is exposed to a concentrated liquid detergent, rinse it immediately with
fresh water.

Do not expose your phone to water at high pressure, and avoid immersing the phone in
water for more than 30 minutes to maintain the waterproof capability.

Clean by hand only. Do not use a hard brush or sponge as this may damage the surface
of the phone and affect phone’s waterproof capability.

Do not use a washing machine, ultrasonic cleaner, or dishwasher. Doing so may
damage the phone and affect the waterproof capability.

Remove all jewelry to avoid scratching the surface of the phone.

Do not attempt to clean your phone in extreme cold or hot conditions. Water can
penetrate the phone during a rapid temperature change. If the phone has been exposed
to extreme temperatures, allow it to return to room temperature before cleaning.

Advertising