Charge the battery wirelessly, Turn your phone on and off – Kyocera DuraForce Pro User Manual

Page 17

Advertising
background image

Get Started

6

Warning:

Be sure all ports and covers are properly sealed to maintain the phone's
waterproof capability.

Charge the Battery Wirelessly

Your phone supports the PMA standard via a wireless charging accessory (sold separately).
Follow the steps below to charge your phone wirelessly.

1. Locate the charging area on your wireless charger by referring to the charger

documentation.

2. Place your phone in contact with the charger, ensuring that the charging area of your

phone touches the charging area of your wireless charger.

Before starting wireless charging, please note the following:

If the charging areas are not touching, the charging results will be poor.

Make sure there is nothing between your phone and wireless charger.

Your phone may become hot while charging the battery.

If

charging doesn’t start after positioning your phone correctly, please use the AC

adapter that came with your phone.

For more information on wireless charging, see your wireless charger documentation.

Turn Your Phone On and Off

The instructions below explain how to turn your phone on and off.

Turn Your Phone On

► Press and hold the Power key until the screen lights up.

Advertising