Yaskawa FSP Amplifier FlexWorks - Manual (Page 60)

Operating the FSP Amplifier Using FlexWorks
60
4.8.3. Running the Mechanical Analysis
To perform a mechanical analysis:
1. Run the motor to excite the machine and measure the
frequency characteristics.
2. Run the process by pressing the START button.
W ARNING :
The motor will begin moving once Start has been pressed.
Once the process is completed, a graph is displayed. The
values of resonance and anti-resonance frequency values (if
any) are displayed at the bottom right corner of the graph.
Figure 32: Sample Mechanical Analysis Output