Yaskawa FSP Amplifier FlexWorks - Manual (Page 69)

Operating the FSP Amplifier Using FlexWorks
69
4. Click OK.
The Curve Shape window is closed. Array will be displayed in
the Curve Shape column of the Position Setting table.
4.9.4.7. Saving a Profile
To save a profile:
1. Click Save in the Cam Profile File area.
The Save Cam Profile dialog box is displayed.
2. Enter a name for the profile file in the File name field, select
a folder in which to save the file, and click Save.
The file is saved, with an .XDP extension.
N OTE :
After downloading a profile, it is saved in the FSP Amplifier.
Unlike parameters and programs, which can be uploaded from
the FSP Amplifier to FlexWorks, ECAM tables cannot be
uploaded. Thus, it is important that profiles are saved on a disk
for backup purposes.
4.9.4.8. Completing a Profile
To complete your profile definition:
1. Once you have completed the profile, click Finish.
2. The Electronic Cam window is closed.
0.
4.9.5. Loading a Profile
You can load and use profiles that have previously been saved. It
does not matter if the profile was originally written for a different
project.
To load a profile:
1. Select Electronic CAM from the Tool menu, or click
Electronic Cam on the toolbar.
The Electronic CAM window is displayed.
2. Enter a number that you will use to identify the profile in the
Profile Number field.
3. Click Add Profile.
The profile is added to the Profile List.
4. Click on the Position Setting tab.