HP Designjet 10000s Printer series - Manual (Page 109)

5. Install the media roll (2) on the sub-scroller (1) and replace and lock the removable flange (3).
NOTE Take care to position the media roll on the sub-scroller so it does not overlap the
media roll on the main scroller.
NOTE It is not possible to print on the inside of the media when using dual roll printing.
6. Unscrew the attachment knob (2) and remove the tension arm (1) from the sub-scroller center holder
(3).
ENWW Install dual media rolls on separate scrollers 99
How do
I use dual medi
a
rolls?