HP Designjet 10000s Printer series - Manual (Page 244)

The problem is… (checklist)
Before deciding that there is a serious problem with the printer, check the following items.
Symptom Items to be checked Corrective measures
No power Power cable connection Check that the power cable is correctly
plugged into the power outlet.
Power supply to the outlet Supply power to the power outlet.
Power switch on/off Turn on the power switch (Refer to Turn
the power on/off ).
The media guide is not heated even when
the heater is turned ON. Printer status The media guide is heated during
printing. Be sure the media guide is
heated by printing the test pattern.
Heater front panel Turn on the heater (FRONT, PRINT, or
REAR) check that the media guide is
heated by printing the test pattern.
The printer fails to start or operate
correctly ERROR LED and message on the front
panel Refer to: The problem is… An error
message .
Cannot print USB cable connection Connect the USB cable correctly (Refer
to
Connect to a computer ).
ERROR LED and message on the front
panel Refer to: The problem is… An error
message .
ERROR LED off Print the nozzle adjustment pattern
(Refer to
Perform printhead position
adjustment ).
The data are not processed immediately DATA LED (flashing?) Check the communication to the
computer.
234 Chapter 8 The problem is… (troubleshooting topics) ENWW
T
h
e pr
ob
lem is…
(tr
ou
bl
esho
o
ti
n
g
to
p
ics
)