HP Designjet 10000s Printer series - Manual (Page 119)

CAUTION To use this process, the media rolls must be of the same width and diameter. If the
diameter is different, please use the sub-scroller and main scroller process.
1. Install the two media rolls on the main scroller.
a. Follow steps 1 to 3 of Install a media roll in the printer using the main scroller to install the first
media roll (1) and flange spacer (3) on the main scroller (2). Do not mount the flange stopper
(not shown) at this stage.
b. Slide the flange joint (3) and the second flange spacer onto the main scroller shaft and carefully
align the keys (2) of the flange joint (3) with one of the keyways (1) of the flange spacers.
ENWW Install dual media rolls on the main scroller 109
How do
I use dual medi
a
rolls?