Heater temperature settings – HP Designjet 10000s Printer series User Manual
Page 312
WARNING!
Never touch the heaters, as they can cause burns, and always take care when
touching printer components near the heaters.
Heater temperature settings
1. Heater front panel
2. Heater on/off and temperature setting keys
3. Preset temperature
4. Current temperature
Heater temperatures are preset automatically for all media types. Under normal operating conditions you
do not need to set the temperature.
Use the heater front panel only when you need to make fine adjustments to the heater temperature.
●
On/off setting: use
On/Off
key for each heater.
●
Temperature setting: use the up key or down key for each heater.
●
Front panel display (when the heater is turned on):
●
Upper line: preset temperature for each heater
●
Lower line: current temperature for each heater
●
Front panel display (when the heater is turned off):
●
Upper line: OFF for each heater
●
Lower line: current temperature for each heater
The default temperature range is set between 15 °C and 55 °C.
302
Chapter 15 Tell me about the heaters
ENWW
Tell
me about
the heat
ers