HP Designjet 10000s Printer series - Manual (Page 192)

8. Slide the wiper side edge guard to align its protruding section (1) with the edge of the media (2) but
leave a small space (A) to prevent skewing of the media. This edge guard protects both the liner and
the media.
9. Verify that the wiper side edge guard (1) does not float on the media (2).
CAUTION If the plate (edge guard, wipe) is not held down firmly on the media, it could
scrape the carriage containing the printheads during printing and cause damage to the
printer.
182 Chapter 5 How do I print with a liner ENWW
How do
I print with a liner