HP Designjet 10000s Printer series - Manual (Page 71)

● 4 x media tube flanges (4)
Install the media tube flanges
This procedure describes how to install the media tube flanges on the main scroller (take-up reel).
1. Adjust the media tube spacer position to suit the media width.
2. Prepare the media tube and slide it onto the scroller.
3. Install the rubber spacer C (1) on the scroller (2).
ENWW Use media tube flanges 61
How
do
I p
erf
or
m
b
asic m
edi
a
o
p
erat
ions?