HP Designjet 10000s Printer series - Manual (Page 62)

8. At the rear of the printer, set the white media winding direction switch (1) to the OFF (center) position.
WARNING! If you do not set the media winding direction switch to the OFF position before
installing the take-up reel you risk trapping your hands in the drive mechanism.
9. Install the main scroller (take-up reel) in the printer.
a. Carefully position the drive end of the main scroller (1) into the drive slot on the printer.
b. Carefully lower the opposite end of the main scroller (1) into the scroller retainer.
52 Chapter 2 How do I perform basic media operations? ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?