HP Designjet 10000s Printer series - Manual (Page 167)

6. Carefully pull the liner (1) out of the output side.
Tip If it is difficult to pull the media (1) out, rotate the grid roller (2) with your fingers to feed
the liner through.
7. Check the feed side and take-up side to ensure that the liner is fed out straight from the liner roll. If it
is not completely straight, raise it a little to move it to the left or right as required.
CAUTION Take care not to let the liner become wrinkled because this could cause media
jams.
ENWW Double sided printing with a liner 157
How
do
I prin
t wit
h
a lin
er