HP Designjet 10000s Printer series - Manual (Page 79)

3. Lift the media load lever (1).
4. Feed the media until a beep sounds from the media feeder (about 200 mm).
NOTE If you have problems loading media, feed the media into the printer by holding both
edges of the media.
Take care that the media does not curl inside the rear cover and that the media edge guards
are not obstructing the media path.
ENWW Load cut sheet 69
How
do
I p
erf
or
m
b
asic m
edi
a
o
p
erat
ions?