HP Designjet 10000s Printer series - Manual (Page 190)

4. Slide the cap side edge guard to align its protruding section (1) with the edge of the media (2) but
leave a small gap (A) to prevent skewing of the media (2). This edge guard protects both the liner and
the media.
5. Apply gentle pressure to open the arms (3) of the edge guard hook and slide the guide (2) into the
slot (4) of the pinch roller until you can engage the arms with the lugs (1).
180 Chapter 5 How do I print with a liner ENWW
How do
I print with a liner